Configuration and Use Manual
MMI-20025166
Figure B-7: Externally powered mA output: maximum loop resistance
1100
1000
900
800
700
A
600
500
400
300
200
100
0
0
A. Maximum resistance (Ω)
B. External supply voltage (V)
Note
3. To connect to a point in the local HART loop:
a) Attach the leads from the signal converter to any point in the loop, ensuring that the leads are
across the resistor.
b) Add resistance as necessary to achieve at least one volt across the connection points.
Important
HART/Bell 202 connections require a voltage drop of 1 VDC. To achieve this, add resistance of
250–600 Ω to the connection.
Configuration and Use Manual
7.5
15.0
B
Using ProLink III with the transmitter
22.5
30.0
March 2019
327