Options For Process Variable Fault Action - Emerson Micro Motion 5700 Configuration And Use Manual

Configuration and Use Manual
MMI-20025166

6.7.1 Options for Process Variable Fault Action

Display ProLink III
Upscale Upscale
Downscale Downscale
Zero Zero
Not-a-Number (NAN) Not a Number
Flow to Zero Flow to Zero
None (default) None
Configuration and Use Manual
Configure advanced options for process measurement
Label
Field Communicator
Upscale
Downscale
IntZero-All 0
Not-a-Number
IntZero-Flow 0
None (default)
Description
• Process variable values indicate that the
value is greater than the upper sensor limit.
• Totalizers stop incrementing.
• Process variable values indicate that the
value is lower than the lower sensor limit.
• Totalizers stop incrementing.
• Flow rate variables go to the value that
represents a flow rate of 0 (zero).
• Density is reported as .
0
• Temperature is reported as
equivalent if other units are used (e.g.,
.
32°F
• Drive gain is reported as measured.
• Totalizers stop incrementing.
• Process variables are reported as
.
NAN
• Drive gain is reported as measured.
• Modbus scaled integers are reported as
.
Max Int
• Totalizers stop incrementing.
• Flow rates are reported as
• Other process variables are reported as
measured.
• Totalizers stop incrementing.
• All process variables are reported as
measured.
• Totalizers increment if they are running.
March 2019
, or the
0°C
IEEE
.
0
115