Emerson Micro Motion 5700 Configuration And Use Manual page 352

Transmitters with configurable outputs
Hide thumbs Also See for Micro Motion 5700:
Table of Contents

Advertisement

Software history (NAMUR recommendation NE53)
March 2019
Enhanced the Thermal Expansion Coefficient in the Petroleum Measurement software application to allow
values down to 0.000023 per deg F
Enhanced the slope/offset equation in the Concentration Measurement software application to allow the
offset to correct for negative concentration
Configuration files are successfully restored and transferred
Outputs can be fixed through the local display through active tests
Smart Meter Verification run from the Startup Tasks menu works without issues
Enhanced ProLink III support for downloading services files
Improved the display to show user-configured Special concentration unit labels for the Concentration
Measurement software application
Feature additions:
Added support for the HPV10P sensor
Enhanced the RS-485 communications port when used with Disable ASCII mode to support baud rates less
than 38400
Enhanced the Totalizer Log to record the value of the totalizer before it is reset
Clarified Russian and Chinese translations for local display menus
Enhanced the local display to Recommended Compensation values
Enhanced Advanced Phase Measurement (APM) for Phase II
Enhanced API support so that API 12.2.2 and API 12.2.5 are available for E tables
Enhanced the Audit Trail to distinguish between Modbus/485 (User) and Modbus/USB (Service) ports
Enhanced the display to show Flow Verification Zero
Improved responsiveness of the local display button
Added support for user-configurable totalizer rollover behavior
Enhanced save all service files operation to save the Totalizer log
Added support for Totalizer rollover for both Weights & Measures and OIML when in secured mode with 0
flow
Access to APM Contract Total functionality available without any licenses
Changed default PV/SV/TV/QV to MF/Dens/VF/Temp
Modified API tables B, C, and E to reduce error under certain conditions so they are now approved for use
as shown on the certificate TCV8519 Rev2
October 2017, version 2.0
Document revision 20025166, Rev. AB
Software improvements:
Corrected both Russian and Japanese strings on the local display
Enhanced local display to show the hardware revision level
Support added for running zero verification in secure mode
352
Micro Motion Model 5700 Transmitters with Configurable Outputs
Configuration and Use Manual
MMI-20025166

Advertisement

Table of Contents
loading

Table of Contents