Subaru Legacy 2004 Service Manual page 1213

2. Front Exhaust Pipe
A: REMOVAL
1) Lift-up the vehicle.
2) Remove the under cover.
3) Remove the front exhaust pipe cover.
4) Remove the nuts which hold front exhaust pipe
assembly onto turbocharger joint pipe.
5) While holding the front exhaust pipe assembly,
remove the nuts which hold front exhaust pipe as-
sembly to cylinder head exhaust port.
6) Remove the front exhaust pipe assembly.
B: INSTALLATION
NOTE:
Use a new gasket.
1) Install the front exhaust pipe assembly.
Tightening torque:
!
30 N m (3.1 kgf-m, 22.1 ft-lb)
Front Exhaust Pipe
2) Install the front exhaust pipe assembly to turbo-
charger joint pipe.
Tightening torque:
35 N
3) Install the front exhaust pipe cover.
4) Install the under cover.
5) Lower the vehicle.
EX-00201
C: INSPECTION
1) Check the connections and welds for exhaust
leaks.
2) Check the rear exhaust pipe for holes or rust.
EX-00202
EX-00202
EX(H4DOTC)-5
!
m (3.6 kgf-m, 26.0 ft-lb)
EXHAUST
EX-00201