4) Measure the thrust clearance of crankshaft at
center bearing. If clearance exceeds the limit, re-
place the bearing.
Crankshaft side clearance:
Standard
0.030 — 0.115 mm (0.0012 — 0.0045 in)
5) Inspect individual crankshaft bearings for signs
of flaking, seizure, melting, and wear.
6) Measure the oil clearance on each crankshaft
bearing by means of plastigauge. If the measure-
ment is not within the specification, replace the de-
fective bearing with an undersize one, and replace
or recondition the crankshaft as necessary.
Crankshaft oil clearance:
Standard
0.010 — 0.030 mm (0.00039 — 0.0012 in)
Cylinder Block
ME-00313
ME(H4DOTC)-85
MECHANICAL