Subaru Legacy 2004 Service Manual page 1215

17) Separate the center exhaust pipe from rear ex-
haust pipe.
18) Remove the bolt which holds center exhaust
pipe bracket to transmission.
19) Remove the intercooler bracket.
20) Remove the bolt which holds center exhaust
pipe to hanger bracket.
CAUTION:
Be careful not to pull down the center exhaust
pipe.
21) Remove the center exhaust pipe.
B: INSTALLATION
NOTE:
Use a new gasket.
1) Install the center exhaust pipe and temporarily
tighten the bolt which holds center exhaust pipe to
hanger bracket.
2) Temporarily tighten the bolt which holds center
exhaust pipe to transmission.
Center Exhaust Pipe
3) Connect the center exhaust pipe to turbocharg-
er.
Tightening torque:
35 N
EX-00207
4) Install the center exhaust pipe to rear exhaust
pipe.
Tightening torque:
35 N
EX-00208
5) Connect the connector to rear oxygen sensor.
EX-00209
EX(H4DOTC)-7
!
m (3.6 kgf-m, 26.0 ft-lb)
!
m (3.6 kgf-m, 26.0 ft-lb)
EXHAUST
EX-00204
EX-00207
EX-00206