Chery T21 2014 Service Manual page 505

b. Take out timing pulley fixing bolt (1), washer (2),
crankshaft timing pulley (3), lining (4) and semi-circle
key (5).
CAUTION
 Semi-circle key is small, so it is easy to be ignored. During installation, pay thorough attention not to
forget to install.
26.Remove the clutch assembly
27.Remove the flywheel assembly
28.Remove the cylinder head
29.Remove the oil pan (See page
30.Remove the oil strainer
31.Remove the oil pump assembly
32.Remove the crankshaft rear oil seal
33.Remove the oil deflector assembly.
a. Remove 7 fixing bolts (arrow) from oil deflector
assembly. 
(Tightening torque: 8 ± 3 N·m)
b. Remove the oil deflector assembly.
34.Remove the piston connecting rod assembly.
a. Using a ridge reamer or equivalent, remove all carbon
from the top of cylinder.
b. Remove the connecting rod bearing cap fixing bolts
(arrow), and remove the connecting rod bearing cap.
(Tightening torque: 1st step: tighten to 25 ± 3 N·m;
2nd step: retighten for 90° ± 5°)
Chery Automobile Co., Ltd.
(See page 19-14).
(See page 07-42).
(See page 07-55).
13-20).
(See page 13-23).
(See page 13-24).
(See page 07-44).
07 - SQR484F ENGINE MECHANICAL
4
5
3
2
RT21070260
RT21070940
RT21070950
1
07
83
07–