08 - SQR484F FUEL SUPPLY SYSTEM
5. Disconnect line and wire harness connections on electric fuel pump assembly side.
a. Remove the rear right seat
b. Using a flat tip screwdriver (1), pry up the electric fuel
pump assembly protective cap (2).
c. Disconnect the electric fuel pump assembly connector
(arrow).
d. Disconnect the coupling joint (1) between electric fuel
pump assembly and inlet pipe I assembly.
e. Disconnect the coupling joint (2) between electric fuel
08
pump assembly and inlet and return pipe assembly.
CAUTION
Before disconnecting the joint, remove all dirt and foreign matter from electric fuel pump assembly
pressure cap.
DO NOT forcefully bend or twist delivery pipe.
6. Remove the fuel filter assembly
7. Remove the fuel tank.
a. Loosen the worm clamp (1) and disconnect the
connection between fuel breather hose and filler tube
assembly.
(Tightening torque: 3.5 ± 0.5 N·m)
b. Loosen the worm clamp (2) and disconnect the
connection between fuel filler hose and filler tube
assembly.
(Tightening torque: 3.5 ± 0.5 N·m)
CAUTION
Cover the joint with a plastic bag after disconnecting fuel breather hose and fuel filler hose, in order to
prevent foreign matter from entering fuel tank and fuel from evaporating or leaking.
22
08–
(See page
46-25).
(See page
08-12).
2
2
1
1
Chery Automobile Co., Ltd.
1
RT21080070
RT21080080
2
RT21080180