Chery T21 2014 Service Manual page 589

e. Remove the fixing bolt (1) of oil dipstick on intake
manifold assembly.
(Tightening torque: 8 ± 3 N·m)
f. Disconnect the starter field wire harness connector
(2).
g. Remove the fixing bolt (arrow) of the engine wire
harness on cylinder head cover. 
(Tightening torque: 8 ± 3 N·m)
h. Remove 9 fixing nuts (arrow) from the intake manifold
assembly.
(Tightening torque: 8 ± 3 N·m)
i. Move the engine wire harness away, and remove the intake manifold assembly.
HINT:
While removing the intake manifold assembly, disconnect the intake camshaft variable timing control valve
connector, knock sensor connector, back-up light switch and back-up light switch wire harness clip (for MT
model).
9. Disconnect the coupling joint (arrow) between line
assembly and intake manifold assembly, and remove the
line assembly (1) from the intake manifold assembly.
Chery Automobile Co., Ltd.
10 - SQR484F INTAKE SYSTEM
1
2
RT21100250
RT21100260
RT21100270
1
RT21100280
10–
10
25