Chery T21 2014 Service Manual page 946

18 - QR019CHB CVT
Differential Oil Seal
Removal
CAUTION
 After the oil seal is removed, use a new one during installation.
1. Turn off all the electrical devices and ignition switch.
2. Disconnect the negative battery cable.
3. Remove the axle shaft.
4. Using the special tool (1), remove the differential oil seal
(2).
HINT:
Do not damage the joint surface of the oil seal and
housing during removal.
Installation
1. Apply automatic transmission fluid on the inner ring of the oil seal.
2. Use the special tool (1) to install the differential oil seal
(2) to transmission (3).
18
CAUTION
 When installing the oil seal, apply force evenly and prevent the oil seal from deformation and damage.
 Keep the transmission fluid seal open and oil seal clean, to avoid foreign matter entering the transmission.
 Do not apply other sealant on the oil seal.
 Do not wear velutinous gloves when installation.
 After installing oil seal, make sure that the oil seal end surface and the transmission case are on the
same plane.
3. Other installation steps are in the reverse order of removal.
112
18–
1
2
1
Chery Automobile Co., Ltd.
2
RT21180320
3
RT21180330