Chery T21 2014 Service Manual page 666

13 - SQR484F LUBRICATION SYSTEM
Installation
CAUTION
 When applying seal gum, check the type and expiration date of seal gum.
 Remove impurities, iron chips and residue of seal gum on oil pan.
 Remove oil stain and residue of seal gum on cylinder block and thread hole of oil pan.
 Seal gum should not be applied too thick; otherwise, it will overflow into oil pan due to squeezing, which
will block oil strainer.
 DO NOT add engine oil until seal gum becomes dry after installing oil pan.
1. Uniformly apply seal gum to the oil pan installation
surface as shown in the illustration.
Recommended seal gum: Loctite 5910
CAUTION
 Seal gum should be applied to inside of oil pan mounting bolt hole.
13
2. Pre-tighten the oil pan fixing bolts until it is enough for
press fit, and then tighten the oil pan fixing bolts in the
order shown in the illustration.
(Tightening torque: 15 + 3 N·m)
3. Other installation procedures are in the reverse order of removal.
22
13–
19 12 8 4 1 5 9
18
17
16
15 11 10 14 25
7 3 2 6
Chery Automobile Co., Ltd.
RT21130190
13 20
21
22
23
24
RT21130170