Chery T21 2014 Service Manual page 533

5. Remove the fuel filter assembly.
a. Remove the fuel filter ground wire fixing nut (1).
(Tightening torque: 7 ± 1 N·m)
b. Disconnect the connecting joints (arrow) on both ends
of the fuel filter assembly.
c. Loosen the fuel filter bracket fixing screw (2).
(Tightening torque: 3.5 ± 0.5 N·m)
d. Remove the fuel filter assembly from fuel filter bracket.
CAUTION
 Cover both ends of fuel filter with plastic bags or equivalent to prevent foreign matter from entering.
ENVIRONMENTAL PROTECTION
 Removed fuel filter should be handled by the specialized department according to local laws and
regulations. Never discard it at will.
Installation
Installation is in the reverse order of removal.
CAUTION
 Before connecting hose, check if there is any damage or foreign matter on the hose or joint.
 When installing, push in fuel pipe joint clip until a click sound is heard from coupling joint, then check that
fuel pipe joint clip is on the collar of fuel pipe joint. After installing pipe joint clip, check that fuel pipe joint
cannot be pulled out. Be careful not to damage the joint. If the clip is damaged, replace it.
 Turn ignition switch ON (without starting engine) to apply fuel pressure to fuel supply system, and then
check connections for leakage.
Chery Automobile Co., Ltd.
08 - SQR484F FUEL SUPPLY SYSTEM
1
2
RT21080060
08
13
08–