Chery T21 2014 Service Manual page 577

Hot Wire Air Flow Meter
Removal
CAUTION
 Be sure to wear necessary safety equipment when repairing to prevent accidents.
 Try to prevent body paint surface from being scratched during removal and installation.
1. Turn off all the electrical equipment and ignition switch.
2. Disconnect the negative battery cable.
3. Remove the engine trim cover assembly
4. Remove the hot wire air flow meter.
a. Disconnect the hot wire air flow meter connector (1).
b. Remove 2 fixing bolts (arrow) from the hot wire air
flow meter. 
(Tightening torque: 4.5 ± 0.5 N·m)
c. Remove the hot wire air flow meter.
Installation
Installation is in the reverse order of removal.
Chery Automobile Co., Ltd.
(See page 10-10).
10 - SQR484F INTAKE SYSTEM
1
RT21100081
10–
10
13