Chery T21 2014 Service Manual page 467

Installation
CAUTION
 Be sure to clean the dirt around oil seal retainer and on the inner wall before installation.
 Check oil seal for damage before installation. If there is any damaged, replace it.
 Be sure to prevent the lip of crankshaft rear oil seal from being scratched during installation.
 Be careful not to damage oil seal retainer during installation.
1. Replace the new crankshaft rear oil seal.
2. Using the crankshaft rear oil seal installer (1), install the
oil seal (2) with the part number side facing outward.
HINT:
Apply a coat of engine oil to the rear oil seal lip or
crankshaft rear oil seal journal.
3. Other installation procedures are in the reverse order of removal.
Chery Automobile Co., Ltd.
07 - SQR484F ENGINE MECHANICAL
2
1
RT21070301
07
45
07–