Chery T21 2014 Service Manual page 980

19 - CLUTCH
Clutch Release Cylinder Assembly
Removal
WARNING
 Brake fluid in release cylinder is harmful to your skin, be sure to wear protective gloves before operation.
 Once brake fluid contacts with your skin, wash it off with water immediately.
CAUTION
 Collect brake fluid with a container while servicing.
 Make sure fluid level in reservoir is at "MAX" after replacing release cylinder.
 DO NOT allow brake fluid to spray onto body surface, or it will damage the painted surfaces. If any brake
fluid is get onto the painted surfaces, wash it off with water immediately.
1. Disconnect the negative battery cable.
2. Drain the brake fluid
HINT:
Collect brake fluid with a container.
3. Remove the clutch release cylinder.
a. Remove the pipe joint and pipe assembly II from
clutch release cylinder.
(Tightening torque: 16 ± 2 N·m)
19
b. Remove the clutch release cylinder fixing bolts (arrow)
and then remove the clutch release cylinder.
(Tightening torque: 22 ± 2 N·m)
12
19–
(See page 26-13).
Chery Automobile Co., Ltd.
RT21190150
RT21190160