Chery T21 2014 Service Manual page 447

Installation
Installation is in the reverse order of removal.
CAUTION
 Before installation, Remove oil and foreign matter from accessory drive belt.
 After installing accessory drive belt, turn crankshaft 2 turns with a wrench to make sure to install
accessory drive belt in place, and not interfere with other components.
Adjustment
1. Check the tension of accessory drive belt.
a. Turn the crankshaft pulley 2 turns. Distribute the belt tension between each pulley evenly.
b. Apply 100 N of force to center part of the belt between
alternator pulley and tensioner with your thumb.
Check that the displacement of belt should be within 
5 - 6 mm. If the displacement is too large or too small,
adjust or repair.
Chery Automobile Co., Ltd.
07 - SQR484F ENGINE MECHANICAL
5 ~ 6 mm
100 N
RT21070040
07
25
07–