Chery T21 2014 Service Manual page 410

06 - SQR484F ENGINE MANAGEMENT SYSTEM
Installation
Installation is in the reverse order of removal.
CAUTION
 Never allow any kinds of gasket and washer between sensor and engine block. Only the metal part of
sensor can contact with the engine block directly.
 DO NOT apply lubricant, grease or seal gum when installing knock sensor. Keep engine block clean and
dry, and never allow any foreign matter (such as oil) on the installation area of knock sensor.
 Never tap knock sensor when installing it.
06
246
06–
Chery Automobile Co., Ltd.