Chery T21 2014 Service Manual page 468

07 - SQR484F ENGINE MECHANICAL
Cylinder Head Cover
Removal
CAUTION
 Blow dirt and debris away from upper surface of cylinder head cover with compressed air.
 Be sure to wear necessary safety equipment when repairing to prevent accidents.
 Try to prevent body paint surface from being scratched during removal and installation.
1. Turn off all the electrical equipment and ignition switch.
2. Disconnect the negative battery cable.
3. Remove the engine trim cover assembly
4. Remove the cylinder head cover.
07
a. Remove the engine wire harness assembly fixing bolt (arrow).
(Tightening torque: 7 ± 1 N·m)
b. Remove the connecting clip (1) between engine wire
harness assembly and cylinder head cover.
c. Rotate the fuel tank cap (2) counterclockwise to
remove it.
d. Remove the clamp (3) and disconnect the connection
between crankcase ventilation hose and cylinder
head cover.
e. Remove the high-voltage cables
f. Disconnect the intake camshaft position sensor
connector (1) and exhaust camshaft position sensor
connector (2).
g. Remove the fixing bolt (1) from intake camshaft
position sensor and remove the intake camshaft
position sensor (2) from cylinder head cover. 
(Tightening torque: 8 ± 0.5 N·m)
h. Remove the fixing bolt (3) from exhaust camshaft
position sensor and remove the exhaust camshaft
position sensor (4) from cylinder head cover. 
(Tightening torque: 8 ± 0.5 N·m)
46
07–
(See page 10-10).
(See page 14-8).
2
1
2
1
4
3
1
2
Chery Automobile Co., Ltd.
3
RT21070310
RT21070320
RT21070330