Electronic Accelerator Pedal
Removal
CAUTION
Be sure to wear necessary safety equipment when repairing to prevent accidents.
Try to prevent body paint surface from being scratched during removal and installation.
1. Turn off all the electrical equipment and ignition switch.
2. Disconnect the negative battery cable.
3. Remove the electronic accelerator pedal.
a. Disconnect the electronic accelerator pedal connector
(1).
b. Remove 3 fixing bolts (arrow) from the electronic
accelerator pedal.
(Tightening torque: 10 ± 2 N·m)
c. Remove the electronic accelerator pedal.
Installation
Installation is in the reverse order of removal.
Chery Automobile Co., Ltd.
10 - SQR484F INTAKE SYSTEM
1
RT21100300
10–
10
27