Chery T21 2014 Service Manual page 532

08 - SQR484F FUEL SUPPLY SYSTEM
ON-VEHICLE SERVICE
Fuel Filter Assembly
Removal
WARNING
 Before operating fuel supply system, please touch vehicle body to discharge static electricity; failure to
do so will cause a fire, even result in an explosion.
 When operating fuel supply system, work area should be in good ventilation and keep fire sources or
open flames away from the work area, in which the fire extinguisher should be equipped.
 After performing procedures for fuel system pressure release, there still remains some pressure in fuel
line. When disconnecting fuel line, cover the joint with a piece of cloth or equivalent to prevent fuel from
spraying out.
 If fuel leakage occurs when operating fuel supply system, please handle the leaked fuel in time.
08
CAUTION
 DO NOT damage disconnected fuel system line or connectors. Cover line joints or connectors with
plastic bags or equivalent, preventing foreign matter from entering.
 Be sure to wear necessary safety equipment when repairing to prevent accidents.
 Try to prevent body paint surface from being scratched during removal and installation.
Disconnection way for all fuel pipe coupling joints in
following procedures is shown in the illustration.
1. Release fuel pressure in fuel supply system
2. Turn off all the electrical equipment and ignition switch.
3. Disconnect the negative battery cable.
4. Raise the vehicle to a proper height.
12
08–
(See page 08-10).
Chery Automobile Co., Ltd.
RT21080050