12 - SQR484F COOLING SYSTEM
4. Pressurize the cooling system to 1.3 ± 0.2 bar with the cooling system pressure tester, and then observe
the pressure changes. If the system pressure does not drop within 2 minutes, it indicates there is no
leakage in the system. If the pressure changes greatly, it indicates that there is a leakage in the system;
find the leaking area and perform troubleshooting.
Coolant Concentration Test
CAUTION
DO NOT mix different colors or types of coolant.
Please select coolant which is suitable for local climate in different areas.
Please read measured value at the scale line. In order to distinguish the scale line more clearly, drip a
drop of water on the glass of freezing point tester with a pipette, then the scale line can be clearly
distinguished via a "waterline".
Test Procedures
1. As shown in the illustration, drip a drop of coolant on the
glass of freezing point tester with a pipette, and then
observe the freezing point value of coolant.
12
2. As shown in the illustration, observe the scale 3 of
freezing point tester to read the ethylene glycol coolant
freezing point value. The freezing point value must be
kept at -35°C or lower.
If the freezing point is beyond the specified value, replace the coolant.
HINT:
Scale 1 is used to measure the freezing point value of propylene glycol coolant, and scale 2 is used to
measure the battery electrolyte concentration.
12
12–
ETHYLENE
PROPYLENE
GLYCOL
GLYCOL
-50
2
1.40
-50
1.35
-40
-40
1
1.30
-30
-30
1.25
-20
-20
1.20
1.15
-10
-10
BATTERY
ELECTROLYTE
1.10
d
20
20
0( C)
0( C)
O
O
WATERLINE
ANTIFREEZE
Chery Automobile Co., Ltd.
RT21120050
3
RT21120060