11 - SQR484F EXHAUST SYSTEM
c. Detach the diamond shaped hanger block (arrow)
between center pipe assembly and body hook.
d. Remove the center pipe assembly.
Installation
Installation is in the reverse order of removal.
CAUTION
If gasket is damaged, replace it, and remove foreign matter on joints and threads.
If sphere flange grommet is damaged, replace it, and remove foreign matter on joints and threads.
If there are cracks or leaks, replace the damaged parts.
During installation, check that exhaust system components do not contact with muffler heat insulator I or
vehicle underbody. Make sure that clearance between exhaust system components and muffler heat
11
insulator I or vehicle underbody is more than 25 mm.
Check for exhaust gas leaks. If gas leaks, tighten defective area to prevent leaking. Replace damaged
parts as necessary.
16
11–
Chery Automobile Co., Ltd.
RT21110160