19 - CLUTCH
Clutch Master Cylinder Assembly
Removal
WARNING
Brake fluid in master cylinder is harmful to your skin, be sure to wear protective gloves before operation.
Once brake fluid contacts with your skin, wash it off with water immediately.
CAUTION
Be careful when removing clutch master cylinder from engine compartment. Incorrect operation may
damage the hydraulic line, also cause clutch to separate improperly.
DO NOT allow brake fluid to spray onto body surface. Brake fluid may damage the painted surfaces. If
any brake fluid is get onto the painted surfaces, wash it off with water immediately.
1. Disconnect the negative battery cable.
2. Drain the brake fluid
HINT:
Collect brake fluid with a container.
3. Loosen the elastic clamp and disconnect the master cylinder inlet hose.
4. Remove the clutch master cylinder.
a. Push the locating clip in the direction of arrow, and
pull out the pipe from clutch master cylinder.
19
b. Remove the fork retainer (1) and pull out the center
pin (2).
10
19–
(See page
26-13).
2
3
Chery Automobile Co., Ltd.
RT21190100
1
RT21190080