Chery T21 2014 Service Manual page 599

ON-VEHICLE SERVICE
Exhaust Manifold Assembly
Removal
WARNING
 The temperature of exhaust system is very high when engine is running. Before removal, make sure that
engine has stopped running, otherwise, there is a risk of scald injury.
CAUTION
 Be sure to wear necessary safety equipment to prevent accidents when repairing.
 Try to prevent body paint surface from being scratched during removal and installation.
1. Turn off all the electrical equipment and ignition switch.
2. Disconnect the negative battery cable.
3. Remove the engine trim cover assembly
4. Remove the exhaust manifold heat insulator.
a. Remove 4 fixing bolts (arrow) from the exhaust
manifold heat insulator.
(Tightening torque: 23 ± 2 N·m)
b. Remove the exhaust manifold heat insulator.
5. Remove the exhaust manifold assembly.
a. Remove 4 coupling nuts (arrow), disconnect the
connection between exhaust manifold assembly and
precatalytic converter assembly, and take off the
gasket in the connecting part.
(Tightening torque: 50 ± 5 N·m)
Chery Automobile Co., Ltd.
(See page 10-10).
11 - SQR484F EXHAUST SYSTEM
RT21110020
RT21110030
11–
11
7