Chery T21 2014 Service Manual page 469

i. Remove 12 fixing bolts from cylinder head cover in the
order shown in the illustration.
(Tightening torque: 8 + 3 N·m)
j. Remove the cylinder head cover gasket (arrow) from
cylinder head cover.
5. Remove the trim cover rear right bracket and rear left bracket from cylinder head cover.
Installation
1. Remove the residue of seal gum on camshaft 1st bearing cap and cylinder head cover with a scraper.
2. Replace the cylinder head cover gasket.
3. Install the cylinder head cover gasket into the groove of
cylinder head cover.
HINT:
Before installing cylinder head cover gasket, apply seal
gum to the cylinder head cover groove in the areas as
shown in the illustration. Avoid gasket falling out from
groove during installation.
4. Apply seal gum to connecting part of camshaft 1st
bearing cap and cylinder head cover in the oval areas as
shown in the illustration.
Chery Automobile Co., Ltd.
07 - SQR484F ENGINE MECHANICAL
1 5 8
12 11
10
7
2 6
4
9
3
RT21070340
07
RT21070350
RT21070360
RT21070370
47
07–