Chery T21 2014 Service Manual page 857

Transmission Fluid Temperature Sensor Inspection
1. Turn off all the electrical devices and ignition switch.
2. Disconnect the transmission wire harness connector.
3. Check for resistance between the transmission wire
harness connector terminals 1 and 2.
Item
Gear Box
Primary Shaft Speed Sensor Inspection
1. Turn off all the electrical devices and ignition switch.
2. Disconnect the primary shaft speed sensor connector.
3. Check for resistance between the terminals of primary
shaft speed sensor as shown in the table below at normal
temperature.
HINT:
The inner parts of the sensor are triode and capacitor, and will be affected greatly by the environment and
usage condition. Therefore, the actual measured value is within the specified value plus/minus 15% in the
table below.
Item
Primary Shaft Speed Sensor
Chery Automobile Co., Ltd.
Terminal Temperature (°C (°F))
1 - 2
Multimeter Connection
+
1
3
1
3
Resistance (KΩ)
20 (68)
80 (176)
Specified Condition
-
3
1
2
2
18 - QR019CHB CVT
RT21180240
6.5
0.9
RT21180250
18
(MΩ)
3.313
6.56
1.649
11.56
23
18–