Chery T21 2014 Service Manual page 644

12 - SQR484F COOLING SYSTEM
c. Remove the water pump assembly and gasket.
Inspection
1. Check water pump gasket.
Check water pump gasket for wear or bends. If wear or
bends are found, replace the gasket.
2. Check water pump assembly.
Check water pump assembly carefully. If any of the following occurs, replace the water pump assembly
immediately.
a. Contact surfaces of water pump assembly and cylinder block is uneven.
b. Impeller of water pump assembly is damaged.
c. Bearing of water pump assembly is loosened.
d. There is abnormal noise when water pump assembly is turning.
Installation
Installation is in the reverse order of removal.
12
CAUTION
 Clean the installation surface of water pump assembly.
 If water pump is damaged, replace rather than attempt to repair it.
 Check that coolant has been added to the specified level after installation.
 Perform cooling system pressure test after adding coolant. check for leakage in the cooling system.
32
12–
Chery Automobile Co., Ltd.
RT21120310