Chery T21 2014 Service Manual page 964

18 - QR019CHB CVT
CVT Assembly
Removal
CAUTION
 In the removal and installation of transmission, make sure that the torque converter does not drop from
the transmission.
 Do not scratch or damage the parts in the removal and installation.
1. Apply the parking brake.
2. Turn off all the electrical devices and ignition switch.
3. Disconnect the negative battery cable.
4. Drain the automatic transmission fluid
5. Remove the air filter
6. Remove the battery
7. Remove the battery tray
8. Remove the starter
9. Remove the engine speed sensor
10.Disconnect the primary shaft pressure sensor wire
harness connector (arrow).
11. Disconnect the wire harness connectors on the
transmission:
18
 Transmission range sensor connector;
 Transmission solenoid wire harness connector;
 Turbine speed sensor wire harness connector;
 Primary shaft speed sensor wire harness connector;
 Remove the transmission ground wire harness fixing
bolt;
(Tightening torque: 18 - 22 N·m)
130
18–
(See page
(See page 10-17).
(See page 16-7).
(See page 16-9).
(See page 15-64).
(See page
18-110).
06-249).
Chery Automobile Co., Ltd.
RT21180640
RT21180650