Chery T21 2014 Service Manual page 743

5
Check PEPS controller power supply circuit
a. Turn ignition switch off.
b. Disconnect the instrument panel fuse and relay box
connectors I-007 and I-031.
c. Check the wire harness between terminal E10 of
instrument panel fuse and relay box connector I-031 and
terminal J101 of PEPS controller connector I-029.
Check for Open
Multimeter
Condition
Connection
I-031 (E10) -
I-029 (J101)
Check for Short
Multimeter
Condition
Connection
I-031 (E10) or
I-029 (J101) -
Body ground
I-031 (E10) or
I-029 (J101) -
Battery positive
d. Check the wire harness between terminal 7 of instrument
panel fuse and relay box connector I-007 and terminal
J111 of PEPS controller connector I-029.
Check for Open
Multimeter
Condition
Connection
I-007 (7) - I-029
(J111)
Check for Short
Multimeter
Condition
Connection
I-007 (7) or I-029
(J111) - Body
ground
I-007 (7) or I-029
(J111) - Battery
positive
Chery Automobile Co., Ltd.
Specified
Condition
Always Continuity
Specified
Condition
Always No continuity
Always No continuity
Specified
Condition
Always Continuity
Specified
Condition
Always No continuity
Always No continuity
15 - SQR484F STARTING SYSTEM
+ -
E1 E2 E3 E4
E13 E14 E15 E16
E9 E10 E11 E12
I-031
J108 J107 J106 J105 J104 J103
J116 J115 J114 J113 J112 J111
I-029
+ -
J108 J107 J106 J105 J104 J103
J116 J115 J114 J113 J112 J111
I-029
1 2 3 4 5 6 7 8 9 10 11 12
13 14 15 16 17 18 19 20 21 22 23 24
27
87
86
85 86
87 30
85
30
I-007
NG
E5 E6 E7 E8
E17 E18 E19 E20
J102 J101
J110 J109
RT21150430
15
J102 J101
J110 J109
25 26
86
87 30
85
RT21150440
59
15–