Chery T21 2014 Service Manual page 455

2. Loosen the intake camshaft phaser assembly.
a. While holding the hexagon surface on intake camshaft
with an open wrench, loosen the intake phaser cover
(1) with the monkey wrench in the direction of arrow
as shown in the illustration. 
(Tightening torque: 30 N·m)
b. Remove the intake phaser cover.
c. While holding the hexagon surface on intake camshaft
with an open wrench, loosen the fixing bolt of intake
camshaft phaser assembly (1) with a torque wrench in
the direction of arrow as shown in the illustration. 
(Tightening torque: 120 ± 5 N·m)
CAUTION
 Loosen intake camshaft phaser assembly without removing it.
3. Install the timing belt.
HINT:
Install the timing belt and be sure that the exhaust
camshaft phaser assembly (1), intake camshaft phaser
assembly (2), crankshaft timing belt pulley (7) and
coolant pump pulley (6) are at inside of timing belt tooth.
Also, the timing belt tensioner (5), contacting idler pulley
(3) and timing belt idler pulley (4) are at outside of tooth.
4. Install the timing belt tensioner.
a. Install the fixing bolt to timing belt tensioner by hand, and do not tighten the fixing bolt of timing belt
tensioner.
Chery Automobile Co., Ltd.
07 - SQR484F ENGINE MECHANICAL
1
1
1
3
5
7
RT21070180
07
RT21070181
2
4
6
RT21070190
33
07–