Installation
Installation is in the reverse order of removal.
CAUTION
If sphere flange grommet is damaged, replace it, and remove foreign matter on joints and threads.
If there are cracks or leaks, replace the damaged parts.
During installation, make sure that clearance between tailpipe of muffler pipe and bumper on the rear
body is more than 30 mm.
Check for exhaust gas leaks. If gas leaks, tighten defective area to prevent leaking. Replace damaged
parts as necessary.
Chery Automobile Co., Ltd.
11 - SQR484F EXHAUST SYSTEM
11–
11
19