Chery T21 2014 Service Manual page 742

15 - SQR484F STARTING SYSTEM
3
Check battery wire harness
a. Check if the voltage between starter power supply wire harness and battery negative is battery voltage.
b. Check if the voltage between engine compartment fuse and relay box power supply wire harness and
battery negative is battery voltage.
Repair or replace battery wire harness
NG
4
Check PEPS controller power supply voltage
a. Disconnect the PEPS controller connector I-029.
b. Check the voltage between terminal J101 of PEPS
controller connector I-029 and body ground.
Multimeter
Connection
I-029 (J101) -
Body ground
15
c. Turn ignition switch ON.
d. Check the voltage between terminal J111 of PEPS
controller connector I-029 and body ground.
Multimeter
Connection
I-029 (J111) -
Body ground
Go to step 6
OK
58
15–
Specified
Condition
Condition
Always 11 - 14 V
Specified
Condition
Condition
Always 11 - 14 V
+ -
J108 J107 J106 J105 J104 J103
J116 J115 J114 J113 J112 J111
I-029
+ -
J108 J107 J106 J105 J104 J103
J116 J115 J114 J113 J112 J111
I-029
Chery Automobile Co., Ltd.
OK
OK
J102 J101
J110 J109
RT21150410
J102 J101
J110 J109
RT21150420