17 - QR525MHE TRANSMISSION
13.Install the output shaft rear bearing.
a. Using a hydraulic press (1), press the output shaft
rear bearing (3) into the output shaft (2).
CAUTION
Check gears on the output shaft for smooth rotation after installation.
Check engagement of gears on the output shaft for looseness or sticking.
Inspection
1. Using a feeler gauge, measure clearance between 1st
driven gear and synchronizer ring.
Standard value: 1.54 mm
Limit value: 1.240 - 1.840 mm
2. Using a feeler gauge, measure clearance between 2nd
driven gear and synchronizer ring.
17
Standard value: 1.54 mm
Limit value: 1.240 - 1.840 mm
3. Using a feeler gauge, measure clearance between 2nd
driven gear and 3rd driven gear.
Standard value: 1.2 mm
Limit value: 0.72 - 1.68 mm
56
17–
1
2
3
Chery Automobile Co., Ltd.
RT21171060
RT21173051
RT21173052
RT21173053