Chery T21 2014 Service Manual page 643

Water Pump Assembly
Removal
WARNING
 Always make sure engine is cold before operating cooling system.
 Never open expansion tank cap or remove drain cock plug when engine is operating or cooling system
overheats. The engine coolant and steam with high-pressure and overheat may flow out and cause
serious personal injury.
 If your body contacts coolant accidentally, clean it with water immediately. If it is serious, please go to
hospital.
CAUTION
 Be sure to wear necessary safety equipment to prevent accidents when repairing.
 Try to prevent body paint surface from being scratched during removal and installation.
1. Turn off all the electrical equipment and ignition switch.
2. Disconnect the negative battery cable.
3. Remove the engine trim cover assembly
4. Drain the coolant (See page
5. Remove the accessory drive belt
6. Use an engine equalizer to hang the engine.
7. Remove the engine right mounting assembly
8. Remove the engine timing belt
9. Remove the water pump assembly.
a. Remove the fixing bolt (arrow) from timing belt idler
pulley, and remove the timing belt idler pulley.
(Tightening torque: 40 + 5 N·m)
b. Remove 6 fixing bolts (arrow) from water pump
assembly.
(Tightening torque: 8 + 3 N·m)
Chery Automobile Co., Ltd.
(See page 10-10).
12-13).
(See page 07-23).
(See page
(See page 07-28).
12 - SQR484F COOLING SYSTEM
07-68).
12
RT21120290
RT21120300
31
12–