Chery T21 2014 Service Manual page 461

Crankshaft Front Oil Seal
Removal
CAUTION
 Be sure to wear necessary safety equipment to prevent accidents when repairing.
 Try to prevent body paint surface from being scratched during removal and installation.
1. Turn off all the electrical equipment and ignition switch.
2. Disconnect the negative battery cable.
3. Remove the engine trim cover assembly
4. Remove the engine lower right protector assembly
5. Remove the accessory drive belt
6. Remove the belt tensioner assembly
7. Use an engine equalizer to hang the engine right lifting eye.
8. Remove the engine right mounting
9. Remove the engine timing belt
10.Remove the crankshaft timing pulley.
a. Loosen the crankshaft timing pulley fixing bolt (arrow).
(Tightening torque: 1st step: tighten to 130 ± 10 N·m;
2nd step: retighten by 65° ± 5°)
HINT:
Shift the transmission into 5th gear (for MT model) or
D position (for CVT model) when loosening the
crankshaft timing gear fixing bolt to engage the
crankshaft and propeller shaft. Another technician
depresses the brake pedal, which can lock the
crankshaft by mechanical gear train.
b. Remove the timing pulley fixing bolt (1), washer (2),
crankshaft timing pulley (3), lining (4) and semi-circle
key (5) in order.
CAUTION
 Semi-circle key is small, so it is easy to be ignored. During installation, pay thorough attention not to
forget to install.
Chery Automobile Co., Ltd.
(See page 10-10).
(See page
(See page 07-24).
(See page 07-27).
(See page 07-68).
(See page 07-28).
07 - SQR484F ENGINE MECHANICAL
48-29).
4
5
3
07
RT21070250
1
2
RT21070260
39
07–