Chery T21 2014 Service Manual page 985

5. Release the discharge port (arrow).
6. Depress the clutch pedal until brake fluid is drained from discharge port.
7. Depress the clutch pedal and tighten the discharge port.
8. Depress the clutch pedal until there is pressure in the clutch system.
9. Depress the clutch pedal, then release the discharge port and bleed the fluid in brake master cylinder.
10.Repeat steps from 6 to 9 for several times, until there is no air in the hydraulic clutch system any more.
CAUTION
 Never drain brake fluid when bleeding hydraulic clutch.
 Make sure brake level is always at "MAX" during bleeding.
11. Tighten the discharge port, then remove the discharge hose and replace the discharge port dust cover.
12.Check the brake fluid level, add DOT4 brake fluid up to "MAX" as necessary, and then tighten the reservoir
cap.
13.Check clutch pedal stroke. If clutch pedal stroke is excessive, or the condition does not improve, it
indicates that some air is still kept in the system. Bleed the clutch again as necessary.
14.Test the vehicle again and make sure clutch operates normally and depressing feel is good.
Chery Automobile Co., Ltd.
19 - CLUTCH
RT21190270
19
17
19–