Chery T21 2014 Service Manual page 546

08 - SQR484F FUEL SUPPLY SYSTEM
Fuel Rail Injector Assembly
Removal
WARNING
 Before operating fuel supply system, please touch vehicle body to discharge static electricity; failure to
do so will cause a fire, even result in an explosion.
 When operating fuel supply system, work area should be in good ventilation and keep fire sources or
open flames away from the work area, in which the fire extinguisher should be equipped.
 After performing procedures for fuel system pressure release, there still remains some pressure in fuel
line. When disconnecting fuel line, cover the joint with a piece of cloth or equivalent to prevent fuel from
spraying out.
 If fuel leakage occurs when operating fuel supply system, please handle the leaked fuel in time.
CAUTION
08
 Be sure to wear necessary safety equipment when repairing to prevent accidents.
 Try to prevent body paint surface from being scratched during removal and installation.
 DO NOT damage the disconnected fuel system line or connectors. Cover line joints or connectors with
plastic bags or equivalent, preventing foreign matter from entering.
 Injector is a part of high accuracy, featuring good anti-clogging, anti-pollution and atomization, so be
careful not to damage the injector during removal of fuel rail.
1. Release fuel pressure in fuel supply system
2. Turn off all the electrical equipment and ignition switch.
3. Disconnect the negative battery cable.
4. Remove the engine trim cover assembly
5. Remove the fuel rail injector assembly.
a. Disconnect the connectors (arrow) of 4 injectors
separately.
b. Move away the engine wire harness clips from fuel rail.
26
08–
(See page 08-10).
(See page 10-10).
Chery Automobile Co., Ltd.
RT21080260