Chery T21 2014 Service Manual page 609

Muffler Assembly
Removal
WARNING
 The temperature of exhaust system is very high when engine is running. Before removal, make sure that
engine has stopped running, otherwise, there is a risk of scald injury.
CAUTION
 When removing center pipe assembly, an assistant is needed to hold muffler assembly. Prevent muffler
assembly from dropping to cause accidents during operation.
 Be sure to wear necessary safety equipment to prevent accidents when repairing.
 Try to prevent body paint surface from being scratched during removal and installation.
1. Turn off all the electrical equipment and ignition switch.
2. Disconnect the negative battery cable.
3. Raise the vehicle to a proper height.
4. Remove the muffler assembly.
a. Remove 2 spring bolts (arrow), disconnect the
connection between muffler assembly and center pipe
assembly, and take off the sphere flange grommet in
the connecting part.
(Tightening torque: 50 ± 5 N·m)
b. Detach the diamond shaped hanger block (1)
between left side of muffler assembly and body hook.
c. Detach the hanger block III (2) between left side of
muffler assembly and body hook.
Chery Automobile Co., Ltd.
11 - SQR484F EXHAUST SYSTEM
RT21110150
2
1
RT21110170
11–
11
17