Chery T21 2014 Service Manual page 628

12 - SQR484F COOLING SYSTEM
Tank Upper Crossmember Assembly
Removal
WARNING
 Perform removal procedures with engine compartment at low temperature after cooling fan stops
completely, otherwise rotating cooling fan or hot components of engine compartment may cause serious
injury.
CAUTION
 Be sure to wear necessary safety equipment to prevent accidents when repairing.
 Try to prevent body paint surface from being scratched during removal and installation.
1. Turn off all the electrical equipment and ignition switch.
2. Disconnect the negative battery cable.
3. Remove the engine trim cover assembly
4. Remove the radiator grille assembly
5. Remove the water tank upper crossmember trim board
6. Remove the engine hood lock assembly
12
7. Move away the hood lock cable from tank upper crossmember assembly.
8. Remove the tank upper crossmember assembly.
a. Press the clips on both sides of engine compartment
contact switch in the direction of arrow as shown in
the illustration, and remove the engine compartment
contact switch
assembly.
b. Disconnect the connector (arrow) from engine
compartment contact switch, and remove the engine
compartment contact switch.
16
12–
(See page
(See page
(See page
from tank upper crossmember
10-10).
48-8).
(See page 48-10).
37-39).
Chery Automobile Co., Ltd.
RT21120031
RT21120032