Chery T21 2014 Service Manual page 789

Transmission Assembly
Removal
1. Turn off all the electrical equipment and ignition switch.
2. Disconnect the negative battery cable.
3. Remove the battery (See page
4. Remove the battery bracket
5. Remove the air filter assembly
6. Drain transmission oil.
7. Remove the front wheels
8. Remove the drive shaft(See page
9. Use an engine equalizer to hang the engine.
10.Remove the flexible shaft clamps and cotter pins connecting select and shift cable with gear shift
mechanism.
11. Disconnect the back-up light switch connector, ground
wire and clutch line bracket II.
12.Remove the crankshaft position sensor.
a. Remove the fixing bolt from crankshaft position sensor, and remove the crankshaft position sensor.
13.Remove the left mounting
14.Remove the front mounting
15.Remove the rear mounting
16.Remove the clutch release cylinder from transmission
17.Remove the starter (See page
18.Remove the transmission.
a. Support the transmission
transmission carrier.
b. Remove the transmission lower coupling bolts, and
remove the seal plate.
(Tightening torque: 50 ± 5 N·m)
Chery Automobile Co., Ltd.
16-7).
(See page 16-9).
(See page 10-17).
(See page 24-9).
20-5).
(See page 07-67).
(See page 07-66).
(See page 07-64).
15-64).
assembly with
17 - QR525MHE TRANSMISSION
(See page 19-12).
a
RT21170140
17
RT21170150
21
17–