Chery T21 2014 Service Manual page 31

No. Definition
[9] Connector No.
[10] Ground Point
[11] Switch
[12] Vehicle Model
[13] Terminal No.
[14] Ignition Switch
[15] Connected to ...
[16] Fuse and Relay Box Name It indicates the name of fuse and relay box.
[17] Twisted-pair
[18] Backlight Power Supply
[19] LED
[20] CAN
[21] Connector View
[22] Connector Color
Chery Automobile Co., Ltd.
"E-011" indicates the connector number of this component, and the
letter "E" indicates the wire harness code in which the connector is
located. The connector codes are as follows:
E = Engine Compartment Wire Harness;
E = Engine Wire Harness;
I = Instrument Panel Wire Harness;
B = Body Wire Harness;
F = Front Left Door Wire Harness;
H = Front Right Door Wire Harness;
L = Rear Left Door Wire Harness;
R = Rear Right Door Wire Harness;
T = Back Door Wire Harness;
P = Battery Wire Harness;
U = Automatic Transmission Wire Harness (For CVT);
N = Ground Wire Harness.
K = A/C
It indicates the ground connection.
This symbol indicates a switch.
"CVT" indicates it is for CVT model; "MT" indicates it is for MT model.
It indicates the terminal number in the connector of this component.
It indicates the power supply from ignition switch to electrical
equipment.
It indicates that the wire harness is connected to the circuit diagram
on next page. The letter "A" is connected with "A" in circuit diagram on
the next page.
It indicates that the two wires are twisted.
It indicates the illumination power supply output from backlight
adjustment dial.
It is used for indicators, warning lights or illuminations in the switches
or instrument cluster.
It indicates CAN wire in the electrical schematics. It is connected to
CAN system.
It indicates the cross section of connector and description of the
terminal number.
The letter "W" indicates the color of connector. The color codes are
the same as above.
02 - INTRODUCTION
Description
02
25
02–