Chery T21 2014 Service Manual page 215

7
Check air flow meter
a. Remove air flow meter.
b. Check air flow meter for debris and damage.
Clean or replace air flow meter, and go to
NG
next step
8
Check for DTCs
a. Use X-431 3G diagnostic tester to read the ECM DTC.
b. Refer to "DTC Confirmation Procedure".
c. Check if DTC P0101-00, P0102-00 or P0103-00 still exists.
Replace ECM
NG
System is operating normally.
Reassemble vehicle and perform a road test to confirm that malfunction reported by customer has
been repaired.
Chery Automobile Co., Ltd.
06 - SQR484F ENGINE MANAGEMENT SYSTEM
OK
06
OK
51
06–