Chery T21 2014 Service Manual page 457

CAUTION
 Rotate the crankshaft 2 turns, and check the tension of timing belt tensioner. The tension of timing belt is
375 - 483 N. If alignment marks of timing belt tensioner are not aligned, loosen the tensioner fixing bolt,
and adjust the tensioner again.
 In order to ensure the usage life of timing belt, it is necessary to perform timing belt self-adjustment
operation.
10.Perform timing belt self-adjustment.
a. Turn the crankshaft to run timing belt several circles smoothly.
b. Install the camshaft locking special tool.
c. Install the crankshaft timing tool.
d. Loosen the fixing bolts of exhaust/intake camshaft phaser assembly, so that the timing belt returns to
natural state.
e. Tighten the exhaust/intake camshaft phaser assembly fixing bolt.
f. Remove the camshaft locking special tool.
g. Remove the crankshaft timing tool.
11. Tighten the intake/exhaust phaser covers.
(Tightening torque: 30 N·m)
12.Other installation procedures are in the reverse order of removal.
Chery Automobile Co., Ltd.
07 - SQR484F ENGINE MECHANICAL
07
35
07–