Chery T21 2014 Service Manual page 665

c. Loosen and remove the oil pan fixing bolts in the order
shown in the illustration.
(Tightening torque: 15 + 3 N·m)
d. Pry off the oil pan at specific prying locations on the oil pan with oil pan remover and scraper and
remove it.
HINT:
Because the seal gum is sealed between oil pan and cylinder block, never use hard objects, such as a
hammer, to tap it during removal, but it can be tapped slowly from left and right with a rubber hammer.
CAUTION
 Be careful not to damage surrounding parts when removal.
 A transmission carrier can be used to support oil pan during removal, to prevent personal injury from
sudden dropping of oil pan.
6. Remove the residual seal gum on oil pan with oil pan
remover and scraper (1).
CAUTION
 After removing seal gum with oil pan scraper, clean the cylinder block installation surface, thread hole
and oil pan with appropriate cleaner.
Chery Automobile Co., Ltd.
13 - SQR484F LUBRICATION SYSTEM
19 12 8 4 1 5 9
18
17
16
15 11 7 3 2 6 10 14 25
1
13 20
21
22
23
24
RT21130170
13
RT21130180
21
13–