11. Remove the intake camshaft phaser assembly.
a. While holding the hexagon surface on intake camshaft
with an open wrench, loosen the intake phaser cover
(1) with the monkey wrench in the direction of arrow
as shown in the illustration, and remove the intake
phaser cover.
(Tightening torque: 30 N·m)
b. While holding the hexagon surface on intake camshaft
with an open wrench, loosen the fixing bolt of intake
camshaft phaser assembly (1) with a torque wrench in
the direction of arrow as shown in the illustration, and
remove the intake camshaft phaser assembly.
(Tightening torque: 120 ± 5 N·m)
12.Remove the camshaft oil seal.
a. Using a flat tip screwdriver wrapped with tape, pry out
the exhaust camshaft oil seal (1) and intake camshaft
oil seal (2) carefully.
CAUTION
Be careful not to damage the oil seal retainer and surface of camshaft when removing camshaft oil seal.
Chery Automobile Co., Ltd.
07 - SQR484F ENGINE MECHANICAL
1
RT21070180
1
RT21070181
1
2
RT21070230
07
37
07–