a. Soak the thermostat in water, heat the water gradually
and perform inspection.
Opening temperature of thermostat is 82 ± 2°C.
Maximum lift of thermostat is no less than 8 mm.
Temperature is 103 ± 1°C when thermostat opens
fully.
b. Check that the thermostat closes when temperature is low (5°C lower than the opening temperature).
c. If above conditions are not met, replace the thermostat.
Installation
Installation is in the reverse order of removal.
CAUTION
As shown in the illustration, align the protrusion (1) of thermostat grommet and groove (2) of thermostat
seat during installation.
Check that coolant has been added to the specified level after installation.
Chery Automobile Co., Ltd.
12 - SQR484F COOLING SYSTEM
RT21120140
2
1
RT21120150
12–
12
21