Table of Contents
Advertisement
Check for Short
Multimeter
Condition
Connection
I-004 (11) or I-013
(5) - Body ground/
Battery positive
I-004 (4) or I-013
(3) - Body ground/
Battery positive
I-004 (9) or I-013
(2) - Body ground/
Battery positive
Repair or replace instrument panel wire
NG
harness
6
Check engine switch
a. Remove the engine switch
b. Check the engine switch
Repair or replace engine switch
NG
7
Confirm DTCs
a. Connect related wire harness connectors.
b. Connect the negative battery cable.
c. Turn ignition switch ON.
d. Connect X-431 3G diagnostic tester to Data Link Connector (DLC) to check if any DTC is detected.
Repair or replace PEPS controller
NG
System operates normally
Chery Automobile Co., Ltd.
Specified
Condition
Always
No continuity
Always
No continuity
Always
No continuity
(See page
15-69).
(See page
15-70).
15 - SQR484F STARTING SYSTEM
OK
OK
OK
15–
15
47
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
