Avaya Definity SI Maintenance Manual page 2115

PMS-LINK (Property Management System Link)
System Technician-Demanded Tests: Descriptions
and Error Codes
Always investigate tests in the order presented in the table below when inspecting
errors in the system. By clearing error codes associated with the Link Retry Test,
for example, you may also clear errors generated from other tests in the testing
sequence.
Order of Investigation
Link Tear Down Test (#213)
Link Retry Test (#215)
1 D = Destructive; ND = Nondestructive
Link Tear Down Test (#213)
This test is destructive.
This test disconnects the existing link between the system and the external PMS
device. If the link has been disconnected already, then this test just returns
"PASS." All resources allocated for a PMS Link are released after this test.
Table 10-490. TEST #213 Link Tear Down Test
Error Test
Code Result
40 ABORT
50
1010 ABORT
FAIL
PASS
555-233-123
Short Test
Sequence
Description/Recommendation
Internal System Error.
1. Retry the command at one-minute intervals a maximum of 5
times.
The PMS Link has been busied out and placed in the
out-of-service state.
1. Enter release pms-link command to release the PMS Link
from busyout state.
2. Retry test pms long command to execute the test.
Internal System Error.
1. Retry the command at one-minute intervals a maximum of 5
times.
The PMS Link is torn down.
Long Test
Sequence
X
X X
Continued on next page
Issue 4 May 2002
1
D/ND
D
ND
10-1329