Special settings for "Direct connection" mode
"Local station" tab
Changing a name
AVM / Eumex
Automatic emulation of the AVM / Eumex
Partnerstation
transmission parameters based on the val-
(device)
ues received from the PC at the Partner-
station.
In the Direct connection setting, the fields are activated in the
lower section of the dialog box: you can set the transmission pa-
rameters for the COM port at the PC:
Select the masked-in setting if you have no reason to reject it.
In the event of malfunctions, reduce the speed in the Bits per
second window. Set your communication software likewise to
this value.
In the case of changes, only permitted values are accepted in
the individual fields, even for manual inputs.
The purpose of station names is to provide a rapid overview. The
lokale Station must be called "PC". The Partnerstations should if
possible be named after the peripheral device connected, e.g.
"Modem".
Station names can be changed in the name field in which you
change or enter the name. Names can contain letters, digits and
blanks. The name must not contain more than 20 characters.
Configuration program options
15