Use The Serial Interface To Find The Firmware Information - Comtech EF Data LPOD Series Installation And Operation Manual

•
The 'Summary' section of the 'Status | Summary' page provides the firmware
details as "FW Revision", "Active Software Image", and "Next Reboot Image", as
shown in this example:
2. Write down your firmware information for further reference or to provide to Comtech EF
Data Product support.
3.2.3.2

Use the Serial Interface to Find the Firmware Information

Chapter 5. SERIAL INTERFACE OPERATION
Use your terminal emulator program or CLC-10 to execute remote queries with the LPOD. Use
either of these remote queries to find the firmware information:
•
Condensed : <0/SWR?{CR}
(returns the firmware version numbers running under Boot, Bulk1, and Bulk2, in the form
B.B.BB)
•
Detailed : <0/FRW?{CR}
(returns the complete information of the firmwares running under Boot, Bulk1, and Bulk2
in the form FW-AAAAAAA B.B.BB DD/MM/YY,
where:
o
o
o
Firmware Update
Low Power Outdoor (LPOD) Amplifier/Block Up Converter (BUC)
FW-AAAAAAA = the firmware part number
B.B.BB = the firmware version number
DD/MM/YY = the firmware release date (Day/Month/Year)
3–6
Revision 15
MN-LPOD